FS BK 467's
Moderators: machine.slave, Doc Kaos, mark, jasonec, CongoBongo, monkeybug
FS BK 467's
I have a few BK 467's here that are collecting dust. I'm thinking of giving them a little overhaul during the holidays or leading up to if I have time, making sure they are working 100% (if there is any interest). Prices would be outrageous or anything, thinking around 80-100 shipped. Any folks have any interest?
LF>>Galaga PCB
Re: FS BK 467's
Yup, definitely! I've been looking for one at a reasonable price.
Re: FS BK 467's
What sockets do these come with?
Working: Mame
Pins: Stargate, Star Wars, Virtual pin
Wanted: money and time
Pins: Stargate, Star Wars, Virtual pin
Wanted: money and time
Re: FS BK 467's
menace wrote:What sockets do these come with?
I'll have to check and see what I have, if I recall, I may have had to build a couple of the common ones when I first had one, then I switched to the CR70.
LF>>Galaga PCB
Re: FS BK 467's
The CR-23 adapters can be tough to find, but easy enough to build. There's also the universal adapter option. How do you like the CR70 compared to the 467. Have a line on one of those as well
Re: FS BK 467's
godadj wrote:The CR-23 adapters can be tough to find, but easy enough to build. There's also the universal adapter option. How do you like the CR70 compared to the 467. Have a line on one of those as well
I have never really had to use the CR70 that much, not enough to do a comparison, actually only once and it did a great job. The setup is a little more tedious than the 467, but seems to be the rejuvenator of choice to a lot. I do have a second one but have yet to determine or confirm it functionable
LF>>Galaga PCB
Re: FS BK 467's
Good to know, thanks! I've always been more interested in the B&K myself. My understanding is they're more straightforward to use, which is nice. Like I said, definitely interested in one if you're looking to sell em! Cheers
Doug
Doug
Re: FS BK 467's
Also very interested in one if you do get a chance to function check.
Please let me know if you have one available for me.
Sent PM.
Please let me know if you have one available for me.
Sent PM.
DE Batman pin, Judge Dredd, NBA Jam, Gauntlet 2019-in-1, Galaga, Star Wars UR, Pac 60-in-1, Rush 2049 x 2, Championship Sprint, GT Complete, Joust, Dig Dug, S.I., Karate Champ
LF: Streetfighter 2 C.E., Asteroids, Spyhunter
LF: Streetfighter 2 C.E., Asteroids, Spyhunter
Re: FS BK 467's
Yippee.
If you do have a CR 23, CR 31 sockets or universal adapter that you can part with, I would be interested in any/all of those as well.
This will be my first rejuvenator.... is it useful/necessary to have the manual with these?
Let me know if you do, otherwise I may start attempting to source the sockets elsewhere.
If anyone reading has these sockets and are able to part with them, let me know. Not sure what socket is required for my Neotec NT-2701 tube, but I know the CR 23 is the one needed for my 19" G-07 tubes.
If you do have a CR 23, CR 31 sockets or universal adapter that you can part with, I would be interested in any/all of those as well.
This will be my first rejuvenator.... is it useful/necessary to have the manual with these?
Let me know if you do, otherwise I may start attempting to source the sockets elsewhere.
If anyone reading has these sockets and are able to part with them, let me know. Not sure what socket is required for my Neotec NT-2701 tube, but I know the CR 23 is the one needed for my 19" G-07 tubes.
DE Batman pin, Judge Dredd, NBA Jam, Gauntlet 2019-in-1, Galaga, Star Wars UR, Pac 60-in-1, Rush 2049 x 2, Championship Sprint, GT Complete, Joust, Dig Dug, S.I., Karate Champ
LF: Streetfighter 2 C.E., Asteroids, Spyhunter
LF: Streetfighter 2 C.E., Asteroids, Spyhunter
Re: FS BK 467's
Thanks Gonemad, much appreciated!!
Who is online
Users browsing this forum: No registered users and 35 guests