spare coin door?

[Electronic Federation]

hey guys, i am restoring a champ sprint i recently picked up. i am in need of the bottom coin door (on the up and down coin door) i just need the lower door not the frame or top part where the coin mechs are, just the plain lower door. mine has a bunch of dents in it, and i want to get it sand blasted and power-coated.

i could buy it or trade. let me know if you have one and what you want! or even a full coin door would be ok too. upper and downer.

thanks

[Chazzman]

You saying you need an atari over/under coin door?

[stayjacked1]

Do you have a pic ? I have one off a Afterburner.


Sent from my iPhone using Tapatalk

[Chazzman]

All I know is you will need two coin slots because on Champ. Sprint they are specific to each player.

[Electronic Federation]

no i dont need the whole under/over coin door. all i need is the actual door, (the bottom door where you go in and pull out the coin box), you can unscrew these right off of the coin panel.

the rest of the coin door, ie, where the coins drop is fine.

here is a pic of what i need. the one i have in my champ sprint thats about to be powder coated is all bent and whatnot.

[jasonec]

It will probably be easier to find a whole coin door and just remove the lower door....

[Electronic Federation]

It will probably be easier to find a whole coin door and just remove the lower door....

ok, ill take that too. anyone have either? I have lots of parts to trade, or i can repair a monitor board, give advice, or purchase. (or reverse that lol, i didnt intentionally put purchase at the end, thats fine too!!!!_)

thanks guys,

chris

[shinynick]

HI Chris, I'm sure I have a door that will work from that pile of stuff I picked up, you can have it no charge... let me know if you ever come out to Georgetown.
Nick

[Electronic Federation]

HI Chris, I'm sure I have a door that will work from that pile of stuff I picked up, you can have it no charge... let me know if you ever come out to Georgetown.
Nick

any chance i could pay you for it, and you could ship it to me? id rather shoot you 25 bucks than pay that in gas and drive all the way there and time~! esp if the lower door is straight and no dents. i dont care if its rusted and the paint is bad, just no dents or anything . its going to be sandblaster/powercoated

let me know~~~~!!!! i can etransfer or paypal. if not, then i guess ill have to wait till i get out that way!!

thanks nick

chris