Foosball Refurbish

Open forum to all gaming discussions

Moderators: Sparky, maxlords, machine.slave, Doc Kaos, mark, omnedon

User avatar
mike boss
Canadian Club
Canadian Club
Posts: 2446
Joined: Wed Sep 19, 2007 4:02 pm
Location: Ajax, Ontario
Contact:

Foosball Refurbish

Postby mike boss » Tue Jan 01, 2019 5:33 pm

Picked up this FAS Foosball table way back in the days of the Starburst auctions.
I've had it for years now and never really done anything to it.

My buddy works at a print shop and offered to print me a replacement playfield for FREE!
It had some damage from some liquids being spilled on it prior to me owning it.

I had never honestly looked into replacing the playfield previously. With this offer of a free playfield I thought I would look into some other ways I could jazz up the table on the cheap.

I picked up two 18" USB LED light strips for about $5-6, I decided I would power them from a Powerbank I picked up from Canadian Tire for $20.
Outside of that everything got cleaned up and the yellowing plastics got a few coats of flat white paint to freshen them up.

I decided to not go with the replacement playfield my buddy printed as it wasn't happy with the quality of stock used.
Years ago when I did a little graphic design I got a drop and repeat printed for my daughters 1st birthday so people could pose in front of it.
My printer did a really good job and the price was quite reasonable. I decided I would email him for a quote on doing the new playfield.

Thanks to some help on BYOAC, opt2not did a vector trace of the FAS logo for me, and the playfield I recreated looks really nice.

Here is how the table looks today with the LED lights installed, the glass all nicely cleaned, and the fresh white paint.

I'll probably get on the replacement playfield this week.

Image
testing out the LED lights before install.

Image
I decided I would use some leftover privacy window film I had to frost the corrugated plastic inserts. The LED lights would be placed behind these.

Image
Originally behind the corrugated plastic were these blue strips of thin wood (or veneer) with the FAS logo.
I decided I could always add my own FAS logo after and print up a decal if I wanted.

Image
I had to clean up old dried liquid from between the channels on the corrugate plastic.

Image
Testing everything out with the window frosting installed.

Image
Testing everything out with the window frosting installed. You can see the yellowing plastics.

Image
Testing everything out with the window frosting installed.

Image
Removed the plastics for paint.

Image
All clean and ready for paint.

Image
All back together again....waiting on new playfield.

Image

Image
Shot in the dark.

Image
Corner close up.
Final Fight w/6-in-1
Bad Dudes vs DragonNinja
Punch-Out! Pi-Bartop
Nintendo DK 60-in-1(V)
Nintendo DK JR Mame(V)
Nintendo Popeye W/Pandoras Box 3
Nintendo Mario Bros Mame + 2 X Aim Trak
Custom DK Jr 48 in 1 Bartop
23" Touchscreen Juke
Foosball Table

User avatar
AllanSim
loonie
loonie
Posts: 307
Joined: Sat Nov 15, 2003 6:48 pm
Location: Whitby, Ontario

Re: Foosball Refurbish

Postby AllanSim » Fri Jan 04, 2019 8:04 am

Looks great! Always liked these.

User avatar
Scott84
Crazy Canuck
Crazy Canuck
Posts: 4741
Joined: Tue Jul 05, 2005 4:55 pm

Re: Foosball Refurbish

Postby Scott84 » Sun Jan 06, 2019 10:06 am

Looks great! I have had the home version since October 2003 (just checked the receipt). I bought it from Costco for $399.99 new. It doesn't have a cover for the play field.

Costco actually sold the home version again this past Christmas online and instore. FAS tables are my favorite for the foos!

User avatar
mike boss
Canadian Club
Canadian Club
Posts: 2446
Joined: Wed Sep 19, 2007 4:02 pm
Location: Ajax, Ontario
Contact:

Re: Foosball Refurbish

Postby mike boss » Mon Jan 07, 2019 7:14 pm

@ Scott84

Do you know what it sold for at Costco this year ?
I got mine back in the auction days, probably under $300 off memory. If not closer to $250 taxes in.
The little refurbish was cheap and looks good, everyone that's seen it digs the lights.
Like I said in the prior post, under $30 for LED's and powerbank.
I had such a busy weekend, it honestly got hijacked. But this week if I remember I'll call for the play field quote.
Seeing how the table looks now, I NEED NEED NEED the play field to really complete this.
Final Fight w/6-in-1
Bad Dudes vs DragonNinja
Punch-Out! Pi-Bartop
Nintendo DK 60-in-1(V)
Nintendo DK JR Mame(V)
Nintendo Popeye W/Pandoras Box 3
Nintendo Mario Bros Mame + 2 X Aim Trak
Custom DK Jr 48 in 1 Bartop
23" Touchscreen Juke
Foosball Table

User avatar
Scott84
Crazy Canuck
Crazy Canuck
Posts: 4741
Joined: Tue Jul 05, 2005 4:55 pm

Re: Foosball Refurbish

Postby Scott84 » Thu Jan 10, 2019 6:08 pm

https://www.costco.ca/FUN-Gitoni-Foosball-Table.product.100431459.html

Under product description it says its made by FAS. Shipping is included in the price so that price is up there.

I want to say I saw it in the store for $500-600.

User avatar
mike boss
Canadian Club
Canadian Club
Posts: 2446
Joined: Wed Sep 19, 2007 4:02 pm
Location: Ajax, Ontario
Contact:

Re: Foosball Refurbish

Postby mike boss » Fri Jan 11, 2019 11:53 pm

Cool.

I've been sick this week, so I haven't looked into my replacement play field yet.
But I did leave my LED lights on, the powerbank gave me 5+ hours !
Final Fight w/6-in-1
Bad Dudes vs DragonNinja
Punch-Out! Pi-Bartop
Nintendo DK 60-in-1(V)
Nintendo DK JR Mame(V)
Nintendo Popeye W/Pandoras Box 3
Nintendo Mario Bros Mame + 2 X Aim Trak
Custom DK Jr 48 in 1 Bartop
23" Touchscreen Juke
Foosball Table

User avatar
Scott84
Crazy Canuck
Crazy Canuck
Posts: 4741
Joined: Tue Jul 05, 2005 4:55 pm

Re: Foosball Refurbish

Postby Scott84 » Mon Jan 21, 2019 5:32 pm

Looks great!

User avatar
mike boss
Canadian Club
Canadian Club
Posts: 2446
Joined: Wed Sep 19, 2007 4:02 pm
Location: Ajax, Ontario
Contact:

Re: Foosball Refurbish

Postby mike boss » Tue Jan 22, 2019 7:20 pm

Thanks !

These little small tweaks/modifications have made a big difference in my honest opinion.
I think ANYTHING is cooler with lights !

Still need to get the replacement field ordered and installed.

Wanna ask the wife if she thinks I should go with the current replacement I have.

I think when it's under the glass it could look cool, I just don't like the stock quality. But in reality what does that matter under glass ?

Not to mention, I guess in reality, no reason why I can't see how it looks and order another as needed.
Final Fight w/6-in-1
Bad Dudes vs DragonNinja
Punch-Out! Pi-Bartop
Nintendo DK 60-in-1(V)
Nintendo DK JR Mame(V)
Nintendo Popeye W/Pandoras Box 3
Nintendo Mario Bros Mame + 2 X Aim Trak
Custom DK Jr 48 in 1 Bartop
23" Touchscreen Juke
Foosball Table

bristol888
Posts: 1
Joined: Wed Mar 06, 2019 5:31 pm
Location: Kingsland, GA
Contact:

Re: Foosball Refurbish

Postby bristol888 » Fri Mar 08, 2019 6:14 pm

That lighting look great!! good job.

User avatar
mike boss
Canadian Club
Canadian Club
Posts: 2446
Joined: Wed Sep 19, 2007 4:02 pm
Location: Ajax, Ontario
Contact:

Re: Foosball Refurbish

Postby mike boss » Fri Mar 08, 2019 10:50 pm

Thanks @ bristol888.

I've also decided to use the playfield my buddy printed out for me.
I think once it is installed under the glass it will look good.
Hoping that I can perhaps get it installed this weekend.
I'm not going to removing all the rods, so I'm hoping I get (A) get the glass cleaned well, and (B) slide this new playfield into place.
Final Fight w/6-in-1
Bad Dudes vs DragonNinja
Punch-Out! Pi-Bartop
Nintendo DK 60-in-1(V)
Nintendo DK JR Mame(V)
Nintendo Popeye W/Pandoras Box 3
Nintendo Mario Bros Mame + 2 X Aim Trak
Custom DK Jr 48 in 1 Bartop
23" Touchscreen Juke
Foosball Table


Return to “Anything Gaming Goes”

Who is online

Users browsing this forum: No registered users and 10 guests