I had good intentions to use this in a MAME cabinet but never got around to building it. It's been sitting in a box for years. Figured somebody else could put this part to good use.
One original WICO trackball. 2-1/4" perfect for a centipede cabinet. Never mounted in a panel and only used briefly to test the PS2 interface that I built from an old mouse. I attached a connector to the wires but for some reason I didn't go by the pin-out provided on the data sheet. This is not the standard connector used in the original cabinets so you will need to change the connector end.
Pickup is preferred in Kitchener. I'm also putting it up on ebay.
$60
https://drive.google.com/open?id=1IMPAF-qtorn_AGmdRAGWNHPN5Eer-92D
https://drive.google.com/open?id=1pu2Bmc3tZYoRocItGyOsv73rlojkVyNx
https://drive.google.com/open?id=1_QOxVNYMJtmDgQSTDrmJdhxoyzitS8lb
FS: Original new WICO trackball for centipede 2.25" + homebrew PS2 adapter
Moderators: Sparky, maxlords, machine.slave, Doc Kaos, mark, omnedon
Who is online
Users browsing this forum: No registered users and 16 guests