Anyone here have experience with appliance repair ? (oven issue)

Off topic, anything goes

Moderators: Sparky, maxlords, machine.slave, Doc Kaos, mark, jasonec

User avatar
mike boss
Canadian Club
Canadian Club
Posts: 2470
Joined: Wed Sep 19, 2007 4:02 pm
Location: Ajax, Ontario
Contact:

Anyone here have experience with appliance repair ? (oven issue)

Postby mike boss » Sat Mar 31, 2018 1:34 pm

Shot in the dark here.
A few weeks about, February 25th to be exact the back element in my over went.
I replaced it the following day and all was fine.
Used the oven last night, no issues. This morning go to put in my turkey for Easter family dinner.
NADDA! the element would not work.
Took the element back to the parts store who checked it and said it was fine.
I removed the old quick connects, added new quick connects and even did a little solder to ensure a good connection.
The element doesn't come on. I took a look around back looking for any sign of damaged wiring, corrosion, burning, but again nothing.
The oven is about 9 years old, I imagine not worth paying to get repaired.
Thought I would ask as many of you guys may have experience with something like this, or just an all around better tech sense than myself.

Thank you
Final Fight
Bad Dudes vs DragonNinja
Punch-Out! Pi-Bartop
Nintendo DK 60-in-1(V)
Nintendo DK JR Mame(V)
Nintendo Popeye W/Pandoras Box 9
Nintendo Mario Bros Mame + 2 X Aim Trak
23" Touchscreen Juke
Fabi Foosball Table
Arcade1up Marvel Pinball

User avatar
tekkaraiden
toonie
toonie
Posts: 527
Joined: Sat May 07, 2011 9:36 pm
Location: London, Ontario

Re: Anyone here have experience with appliance repair ? (oven issue)

Postby tekkaraiden » Sat Mar 31, 2018 1:41 pm

Does it have manual controls (turn knob) or electronic buttons? If manual, the control (turn knob) could be bad. If electronic buttons, electronic board up top could be bad.

User avatar
jasonec
SUPREME VIDIOT
SUPREME VIDIOT
Posts: 11206
Joined: Fri Dec 14, 2012 10:43 pm
Location: Cambridge, Ontario
Contact:

Re: Anyone here have experience with appliance repair ? (oven issue)

Postby jasonec » Sat Mar 31, 2018 1:41 pm

It sounds like it's been cooked.
Donkey Kong, Burgertime, Galaga, Pac-man, Ms.Pac-man, Missile Command, Robotron, Dig Dug, Space Invaders, Arkanoid, Tempest, Raiden, Tetris
http://goo.gl/UW7e9L

User avatar
mike boss
Canadian Club
Canadian Club
Posts: 2470
Joined: Wed Sep 19, 2007 4:02 pm
Location: Ajax, Ontario
Contact:

Re: Anyone here have experience with appliance repair ? (oven issue)

Postby mike boss » Sat Mar 31, 2018 1:47 pm

It's electronic.
And it's allowing me to select back, even adjust the temperature and press "enter" to begin.
However the element then would not come on.
Final Fight
Bad Dudes vs DragonNinja
Punch-Out! Pi-Bartop
Nintendo DK 60-in-1(V)
Nintendo DK JR Mame(V)
Nintendo Popeye W/Pandoras Box 9
Nintendo Mario Bros Mame + 2 X Aim Trak
23" Touchscreen Juke
Fabi Foosball Table
Arcade1up Marvel Pinball

User avatar
mike boss
Canadian Club
Canadian Club
Posts: 2470
Joined: Wed Sep 19, 2007 4:02 pm
Location: Ajax, Ontario
Contact:

Re: Anyone here have experience with appliance repair ? (oven issue)

Postby mike boss » Sat Mar 31, 2018 1:51 pm

It's electronic.
And it's allowing me to select bake, even adjust the temperature and press "enter" to begin.
However the element then would not come on.
I'm watching some tutorial videos, trying to see if I can get an idea of what to look for.
Final Fight
Bad Dudes vs DragonNinja
Punch-Out! Pi-Bartop
Nintendo DK 60-in-1(V)
Nintendo DK JR Mame(V)
Nintendo Popeye W/Pandoras Box 9
Nintendo Mario Bros Mame + 2 X Aim Trak
23" Touchscreen Juke
Fabi Foosball Table
Arcade1up Marvel Pinball

User avatar
menace
stubby
stubby
Posts: 991
Joined: Mon Nov 01, 2004 9:11 pm
Location: Burlington

Re: Anyone here have experience with appliance repair ? (oven issue)

Postby menace » Sat Mar 31, 2018 6:06 pm

Sounds like a relay went. Low voltage is being triggered but no high voltage output. Coyld be 100 things though including sensors control boards etc.
Working: Mame
Pins: Stargate, Star Wars, Virtual pin
Wanted: money and time

Cornchip
timbit
timbit
Posts: 63
Joined: Mon Apr 02, 2007 9:12 pm

Re: Anyone here have experience with appliance repair ? (oven issue)

Postby Cornchip » Sat Mar 31, 2018 7:30 pm

I'd start with checking your breakers (2) that feed your oven. You can trip one side and still have an appliance that appears to function.

User avatar
mike boss
Canadian Club
Canadian Club
Posts: 2470
Joined: Wed Sep 19, 2007 4:02 pm
Location: Ajax, Ontario
Contact:

Re: Anyone here have experience with appliance repair ? (oven issue)

Postby mike boss » Sat Mar 31, 2018 9:06 pm

I found a really good video on YouTube.
Kinda hit right on the head what the issue could be.
If its the main logic, its like $180-250 to replace.
Time to scrap it I think.

Today was 2 hectic with hosting Easter dinner. So I never got an opportunity to test all the voltages.
I'll try and do it tomorrow and see if I can isolate the issue.

Thanks all
Final Fight
Bad Dudes vs DragonNinja
Punch-Out! Pi-Bartop
Nintendo DK 60-in-1(V)
Nintendo DK JR Mame(V)
Nintendo Popeye W/Pandoras Box 9
Nintendo Mario Bros Mame + 2 X Aim Trak
23" Touchscreen Juke
Fabi Foosball Table
Arcade1up Marvel Pinball


Return to “The Donut Shop”

Who is online

Users browsing this forum: No registered users and 14 guests