Vewlix Clone(VESA compatibility, please help).
Moderators: machine.slave, Doc Kaos, mark, jasonec, CongoBongo, monkeybug
Vewlix Clone(VESA compatibility, please help).
Anyone with a Chinese Vewlix clone, would you be so kind to tell me what the VESA compatibility is?
Cheers.
Cheers.
Re: Vewlix Clone(VESA compatibility, please help).
Hey Mr jump. I'm not sure I can help you since I'm not convinced you are VESA mounted. I can check sometime for you though. I believe you are just side mounted right onto the frame. How the panel is on the frame I'm not sure yet. Maybe one isn't the same as another though.
Re: Vewlix Clone(VESA compatibility, please help).
Mr.Jump is my father!
Brad808, if you could check for me, that would mean the world, I'm about to order a couple empty cabs, I have my broker/forwarder/manufacturer all in order, but I am having a hard time figuring out how they mount the monitors, so I can find suitable after market monitors, as the 2011 models they use aren't to my liking. Thanks a lot.
If they're side mounted, how does that work, the monitor just is held in place by brackets?
Any information you could give me would mean a lot brother.
Cheers.
Brad808, if you could check for me, that would mean the world, I'm about to order a couple empty cabs, I have my broker/forwarder/manufacturer all in order, but I am having a hard time figuring out how they mount the monitors, so I can find suitable after market monitors, as the 2011 models they use aren't to my liking. Thanks a lot.
If they're side mounted, how does that work, the monitor just is held in place by brackets?
Any information you could give me would mean a lot brother.
Cheers.
Re: Vewlix Clone(VESA compatibility, please help).
These are the images I'm able to get from the manufacturer. They said it is VESA mount compatable,but I'm not seeing how...it looks jerry-rigged? I'm not sure.
Maybe I'm confused?
They haven't been able to give me a VESA number, e.g. 200x100 or whatever.
Any input would be great.
Re: Vewlix Clone(VESA compatibility, please help).
Yes maybe they are mistaken? I see no vesa. See on your photos side screw holes visible on each? so ye see the brackets on side of my panel are similar. Is there substantial difference in price? Otherwise you may get cab and have hard time finding suitable mon + mounting and have look good as it will have to be exact fit. If you are not happy with panel # they gave you, maybe ask them to source other model # for you and install to say you potential massive headache with bunch cabs no mons?
Re: Vewlix Clone(VESA compatibility, please help).
I'll see what they say...but you know how it is...one question answered a day. lmao...
I'm just worried about having 8ms GTG response time, as well as input lag on a 6 year old monitor can't be that amazing, when i'm mainly building these to run fighting games on. I'm lead to believe you want 5ms GTG for 60hz fighters and low input lag.
I'm just worried about having 8ms GTG response time, as well as input lag on a 6 year old monitor can't be that amazing, when i'm mainly building these to run fighting games on. I'm lead to believe you want 5ms GTG for 60hz fighters and low input lag.
Re: Vewlix Clone(VESA compatibility, please help).
I understand communication limited and yes sometimes multiple days to get into the bottom of a problem. You can check for places like arcade project and arcade otaku for some good LCD compares between vewlix models. That is beyond me as I don't focus on LCD games. From what I understand you can get right from taito their newest models for daimond black. You will be over $2k for the mons i believe. So they are not cheap for very specific mons with specific specs. May be worth it to you though if you only focus on those games.
Re: Vewlix Clone(VESA compatibility, please help).
Yeah, I think the monitors used to be worth a lot. But monitors have come a long way in the past 6 years, and a good IPS 31.5inch 1080p display is only about 300 dollars with 5ms GTG and a good input lag. Which should outshine all the official vewlix screens by now. Even if I have to take the bezel off, it should fit perfectly. I'm just worried about the "non standard" mounting they seem to be using. I know official vewlix has 200x100 vesa mounting. But i think these clones are a little different in their monitor mounting.
Re: Vewlix Clone(VESA compatibility, please help).
I believe you may be mistaken. Keep in mind diamond black are not old monitors and definitely not 6 year old. The cab was just released some months ago. Again all this covered on the other sites I mention with many comparison to other consumer and commercial LCDs and "gaming' LCDs. Again not my area of smarts so I will bow out.
Re: Vewlix Clone(VESA compatibility, please help).
Fair enough, I was comparing to like original style vewlix's when SF4 came out, etc.
I'm just trying to hit that perfect cost/performance peak kinda thing.
I appreciate all the input.
I'm just trying to hit that perfect cost/performance peak kinda thing.
I appreciate all the input.
- ArcadeObsessed
- Posts: 2
- Joined: Sun Jan 28, 2018 6:42 am
Re: Vewlix Clone(VESA compatibility, please help).
Hey man, you still wanting to know about VESA Mounts on Clones ?
I saw this post and had to chime in apologies
These come in 2 varieties I believe now they’re not actually welding the top and bottom brace any more
Like this
If you do get one like this the monitor will come with bracing bars
Arrows point at bars
It’s not standard VESA but I suppose there version
Mine not like that NO VESA whole Monitor comes out and frame
Monitor is screwed down to frame with L brackets
I Sell these machines I do the artwork, jack of all trades
I saw this post and had to chime in apologies
These come in 2 varieties I believe now they’re not actually welding the top and bottom brace any more
Like this
If you do get one like this the monitor will come with bracing bars
Arrows point at bars
It’s not standard VESA but I suppose there version
Mine not like that NO VESA whole Monitor comes out and frame
Monitor is screwed down to frame with L brackets
I Sell these machines I do the artwork, jack of all trades
Re: Vewlix Clone(VESA compatibility, please help).
I appreciate the reply, I was originally going to put my own monitors into these. But I went a different direction. I would be interested in seeing the vinyl art you have, if you'd care to PM.
- ArcadeObsessed
- Posts: 2
- Joined: Sun Jan 28, 2018 6:42 am
Vewlix Clone(VESA compatibility, please help).
Hers some
Pics with artwork
Pics with artwork
Who is online
Users browsing this forum: No registered users and 32 guests