www.cgcc.ca

Looking for a 19” med res monitor with no burn and working.

Let me know what you have, and what you want for it.

Cheers

Nothing?????

I can buy, trade, lend my neighbors wife for a night, whatever, just get out that spare 19” medium res monitor and Lets make a deal.

guess you and everyone else are looking for the same thing. good luck with search.

Seriously, looks like med res monitors are going the same route as Amplifone's and 6100's.

"Vongoosewink
05-26-2017, 03:06 PM
For what it is worth, a buddy of mine and I did a tube-swap on a Wells Gardner med res in a Narc a couple years ago. We just used a standard TV tube, and swapped the yoke. It took a while to converge, but once properly adjusted neither of us could tell a difference - it looked great. Certainly better than the original burned-out and dim tube."

you have the old monitor ? Put the med rez yoke on a standard tube

https://forums.arcade-museum.com/archiv ... 77226.html

"modessitt
05-16-2011, 08:51 PM
The tube has no bearing on whether it is standard or medium res. The difference is the yoke and how it is wound. I've done several repairs of medium-res chassis using a standard-res tube and just swapping the med-res yoke onto it.

As long as both tubes have the same neck pinout (CR-23 for the tube you mentioned - same as a G07, 4900, etc), you can use it as a tube swap if you use the original med-res yoke..."

https://forums.arcade-museum.com/archiv ... 84345.html

Robert wrote:"modessitt
05-16-2011, 08:51 PM
The tube has no bearing on whether it is standard or medium res. The difference is the yoke and how it is wound. I've done several repairs of medium-res chassis using a standard-res tube and just swapping the med-res yoke onto it.

As long as both tubes have the same neck pinout (CR-23 for the tube you mentioned - same as a G07, 4900, etc), you can use it as a tube swap if you use the original med-res yoke..."

https://forums.arcade-museum.com/archiv ... 84345.html

Yes, this is great news..................I just need to find a med res yoke and chassis now, ughhhhhhhhh

Still looking, lol. Who has an extra, decent19” med res monitor they can sell, trade???

Still looking for a 19” med res tube and chassis.....

Geez, these seem to be as hard as color vectors to find....................Still looking

WG 19" tri-synch LCD, slides right in, takes the inputs from your PCB directly... never worry about the monitor again