So... looking for these..
The accessory harnesses for players 3 and 4
Wtb, NBA Jam 3p, 4p kick harnesses..
Moderators: machine.slave, Doc Kaos, mark, jasonec, CongoBongo, monkeybug
Wtb, NBA Jam 3p, 4p kick harnesses..
Neo-Geo Big Red - 520in1 - 21" CRT
HS-5 -NBA JAM TE/MVS4 - 25" CRT
RadMobile - Upright Multi-Racer/Fighter - 19" LCD
2x PS2, 2x 27" CRT, TimeCrisis II/III iLink Co-Op Shooter
22"/16" Virtual Pinball
Trick Time Slot Pachislo
HS-5 -NBA JAM TE/MVS4 - 25" CRT
RadMobile - Upright Multi-Racer/Fighter - 19" LCD
2x PS2, 2x 27" CRT, TimeCrisis II/III iLink Co-Op Shooter
22"/16" Virtual Pinball
Trick Time Slot Pachislo
- theyangman
- Canadian Club
- Posts: 1167
- Joined: Thu Apr 10, 2014 8:46 pm
- Location: London, On
Re: Wtb, NBA Jam 3p, 4p kick harnesses..
theyangman wrote:Are you Eh Lee on FB?
Nailed it
What's up tony.
Neo-Geo Big Red - 520in1 - 21" CRT
HS-5 -NBA JAM TE/MVS4 - 25" CRT
RadMobile - Upright Multi-Racer/Fighter - 19" LCD
2x PS2, 2x 27" CRT, TimeCrisis II/III iLink Co-Op Shooter
22"/16" Virtual Pinball
Trick Time Slot Pachislo
HS-5 -NBA JAM TE/MVS4 - 25" CRT
RadMobile - Upright Multi-Racer/Fighter - 19" LCD
2x PS2, 2x 27" CRT, TimeCrisis II/III iLink Co-Op Shooter
22"/16" Virtual Pinball
Trick Time Slot Pachislo
Re: Wtb, NBA Jam 3p, 4p kick harnesses..
If no one locally can help you out there is a guy who goes by jason_971 on the KLOV forum who makes them. Never bought anything from him but the reviews appear to be pretty good.
- b1buwg97
- Secret Order of the Black Pac
- Posts: 7868
- Joined: Mon Sep 20, 2004 6:30 pm
- Location: London
Re: Wtb, NBA Jam 3p, 4p kick harnesses..
I have a full 4 player blitz harness (which is the same) and a blitz board you could play football instead of the BB (which SUCKS) I kid
Anyway LMK got anything to trade?
Anyway LMK got anything to trade?
Re: Wtb, NBA Jam 3p, 4p kick harnesses..
Thanks b1, maybe a full harness and blitz pcb would make for a nice multi...
Traded my neo Geo stuff for this 4p cp.. so all I got is alcohol and a bit of paper green stuff...
I have the individual harnesses from each player that go to individual molex connectors, so I'm gonna see about tracing the pinouts and make my own harnesses for 3p and 4p.
Been playing too much ghetto pinball to give this project priority...
Traded my neo Geo stuff for this 4p cp.. so all I got is alcohol and a bit of paper green stuff...
I have the individual harnesses from each player that go to individual molex connectors, so I'm gonna see about tracing the pinouts and make my own harnesses for 3p and 4p.
Been playing too much ghetto pinball to give this project priority...
Neo-Geo Big Red - 520in1 - 21" CRT
HS-5 -NBA JAM TE/MVS4 - 25" CRT
RadMobile - Upright Multi-Racer/Fighter - 19" LCD
2x PS2, 2x 27" CRT, TimeCrisis II/III iLink Co-Op Shooter
22"/16" Virtual Pinball
Trick Time Slot Pachislo
HS-5 -NBA JAM TE/MVS4 - 25" CRT
RadMobile - Upright Multi-Racer/Fighter - 19" LCD
2x PS2, 2x 27" CRT, TimeCrisis II/III iLink Co-Op Shooter
22"/16" Virtual Pinball
Trick Time Slot Pachislo
Re: Wtb, NBA Jam 3p, 4p kick harnesses..
Woot woot, looks like its possolible to make the kick harnesses from the factory stuff, midway used some configurable molex connectors!
Neo-Geo Big Red - 520in1 - 21" CRT
HS-5 -NBA JAM TE/MVS4 - 25" CRT
RadMobile - Upright Multi-Racer/Fighter - 19" LCD
2x PS2, 2x 27" CRT, TimeCrisis II/III iLink Co-Op Shooter
22"/16" Virtual Pinball
Trick Time Slot Pachislo
HS-5 -NBA JAM TE/MVS4 - 25" CRT
RadMobile - Upright Multi-Racer/Fighter - 19" LCD
2x PS2, 2x 27" CRT, TimeCrisis II/III iLink Co-Op Shooter
22"/16" Virtual Pinball
Trick Time Slot Pachislo
Re: Wtb, NBA Jam 3p, 4p kick harnesses..
Booyah!
It is 400% possible to make the harnesses if you have the ones that come with the cp.
400% because you can make 4 of them, you only need players 3/4 but u have enough 1 for each harness that goes to each player. Its just a matter of moving the order of 2 wires on p3 and 4 wires on p4. Leave the ground pin on the main pcb header disconnected as the molex won't be long enough to reach. Then take the p1 unified ground and tie it anywhere into your cabinets p1 wiring and it will effectively ground your p3/p4 harness.
Now to figure out how to bolt this up to the cab!
It is 400% possible to make the harnesses if you have the ones that come with the cp.
400% because you can make 4 of them, you only need players 3/4 but u have enough 1 for each harness that goes to each player. Its just a matter of moving the order of 2 wires on p3 and 4 wires on p4. Leave the ground pin on the main pcb header disconnected as the molex won't be long enough to reach. Then take the p1 unified ground and tie it anywhere into your cabinets p1 wiring and it will effectively ground your p3/p4 harness.
Now to figure out how to bolt this up to the cab!
Neo-Geo Big Red - 520in1 - 21" CRT
HS-5 -NBA JAM TE/MVS4 - 25" CRT
RadMobile - Upright Multi-Racer/Fighter - 19" LCD
2x PS2, 2x 27" CRT, TimeCrisis II/III iLink Co-Op Shooter
22"/16" Virtual Pinball
Trick Time Slot Pachislo
HS-5 -NBA JAM TE/MVS4 - 25" CRT
RadMobile - Upright Multi-Racer/Fighter - 19" LCD
2x PS2, 2x 27" CRT, TimeCrisis II/III iLink Co-Op Shooter
22"/16" Virtual Pinball
Trick Time Slot Pachislo
Who is online
Users browsing this forum: No registered users and 34 guests