WTB: 19” med res burn free monitor

[CossackWarrior]

Looking for a 19” med res monitor with no burn and working.

Let me know what you have, and what you want for it.

Cheers

[CossackWarrior]

Nothing?????

[CossackWarrior]

I can buy, trade, lend my neighbors wife for a night, whatever, just get out that spare 19” medium res monitor and Lets make a deal.

[Chazzman]

guess you and everyone else are looking for the same thing. good luck with search.

[CossackWarrior]

Seriously, looks like med res monitors are going the same route as Amplifone's and 6100's.

[Robert]

"Vongoosewink
05-26-2017, 03:06 PM
For what it is worth, a buddy of mine and I did a tube-swap on a Wells Gardner med res in a Narc a couple years ago. We just used a standard TV tube, and swapped the yoke. It took a while to converge, but once properly adjusted neither of us could tell a difference - it looked great. Certainly better than the original burned-out and dim tube."

you have the old monitor ? Put the med rez yoke on a standard tube

https://forums.arcade-museum.com/archiv ... 77226.html

[Robert]

"modessitt
05-16-2011, 08:51 PM
The tube has no bearing on whether it is standard or medium res. The difference is the yoke and how it is wound. I've done several repairs of medium-res chassis using a standard-res tube and just swapping the med-res yoke onto it.

As long as both tubes have the same neck pinout (CR-23 for the tube you mentioned - same as a G07, 4900, etc), you can use it as a tube swap if you use the original med-res yoke..."

https://forums.arcade-museum.com/archiv ... 84345.html

[Robert]

[CossackWarrior]

"modessitt
05-16-2011, 08:51 PM
The tube has no bearing on whether it is standard or medium res. The difference is the yoke and how it is wound. I've done several repairs of medium-res chassis using a standard-res tube and just swapping the med-res yoke onto it.

As long as both tubes have the same neck pinout (CR-23 for the tube you mentioned - same as a G07, 4900, etc), you can use it as a tube swap if you use the original med-res yoke..."

https://forums.arcade-museum.com/archiv ... 84345.html

Yes, this is great news..................I just need to find a med res yoke and chassis now, ughhhhhhhhh

[CossackWarrior]

Still looking, lol. Who has an extra, decent19” med res monitor they can sell, trade???

[CossackWarrior]

Still looking for a 19” med res tube and chassis.....

[CossackWarrior]

Geez, these seem to be as hard as color vectors to find....................Still looking

[Chazzman]

WG 19" tri-synch LCD, slides right in, takes the inputs from your PCB directly... never worry about the monitor again